Coal tar epoxy anti-corrosion coating (double) 1. Composition: two-component epoxy paint preparation, modifiers, coal tar pitch, corrosion fillers, specialty chemicals, solvents, etc. made by a special process. Points A and B group packaging. 2. Performance: a room temperature, even low (-20 ℃) ??also can be cured, with low water absorption, good water resistance, resistance to microbial strong erosion, high resistance to penetration characteristics. Coating has good mechanical properties, electrical insulation properties, wear resistance, heat resistance, heat resistance and other better. Paint dry fast, excellent physical and mechanical properties, convenient and simple construction operations. 3. Uses: Widely used in chemical equipment, petroleum equipment, electrical equipment, railway, bridges, steel plants, cranes, cars, machine tools and other steel structures with rust primer can be used as supporting a variety of finish paint. 4. Technical Specifications: Item Index Paint color and appearance of black, flat paint drying time (25 ± 1 ℃) dry (h) ≤ 5 hard work (h) 24 Flexibility mm ≤ 2 Adhesion (grid method) level ≤ 1 Viscosity (Tu-4 cup, 25 ± 1 ℃), S> 70 μm ≤ 50 fineness impact resistance cm 30 5. Construction Specifications: 5.1 Configuration: The paint stir thoroughly before use to bottom of the barrel without deposits, according to the paint: hardener = 10: (proportion indicated or drums on) 1 ratio mix. The amount of diluent is generally 5-15%, depending on the construction situation. Do the different varieties of paint thinner mix should be used to support diluent. 5.2 Applicable Period: How much is usually equipped with a number, with a good paint used within four hours is recommended. 5.3 Surface treatment requirements: to be coated must be processed prior to painting, so the surface no rust, no oil, no dust, surface preparation grade St2 and can, in order to increase the film adhesion and durability. 5.4 coating thickness: General once brushing dry film thickness of about 60μm. 5.5 Theoretical amount: If you do not consider the environmental impact of the coating when the actual construction, methods, surface condition and structure, shape and other factors, the general consumption of 0.20kg / m2. 6. Packaging and storage: 6.1 Packaging: drum sealed packaging, paint barrel NW 20kg, barrel curing agent NW 2kg, thinner barrel net weight 15kg. 6.2 Storage and transport: is flammable, keep away from fire sources stored in a cool dry ventilated place, avoid the sun and rain, collision. 6.3 is valid for one year, over the period, after the re-inspection can still be used.